Our Fleet

High-Flow Skid Steer Loaders

450mm profiler head: can grind to a depth of 100mm, ideal for small butt joints against manholes & around valves.

50mm profiler head: ideal for keying in concrete curbs in parking lots.
1.5 and 1.82 meter wide sweeper attachments; usually works behind profiler cleaning up ground asphalt finds. Swept material can be dumped right into dump trucks from sweeper bucket or stockpiled on site.
1.82 meter wide cleanup bucket for grading & loading.
Our loaders are equiped with a water system to eliminate dust and smoke caused by grinding.

This 28,000 kg self-propelled machine is best suited for full-depth asphalt reclamation and for mixing loose material.

The RS-650 offers the power and performance to make high production work of even the most difficult cutting and mixing assignments.
The machine's standard 2.4 m wide drum is fitted with conical teeth for reclamation and stabilization and offers variable cutting depths up to 16 inches.

This 20,000 kg self-propelled machine can perform full depth removal or profiling.

Prepares existing asphalt for overlays with programmable grade controls for both sides of drum during cut.
Ideal for butt joints/step mill before overlay; curb reveals before overlay; MMS for permanent patch on trench lines.
Can cut up to 33 cm deep x 1.2 m wide on a single pass or make multiple passes for greater widths.

This 36,040 kg self-propelled machine can perform full depth removal or profiling.

With its innovative extraction technology, the vacuum cutting system ensures perfect visibility of the milling edge during the day and at night.
Prepares existing asphalt for overlays with programmable grade controls for both sides of drum during cut.
Ideal for butt joints/step mill before overlay; curb reveals before overlay; MMS for permanent patch on trench lines.
Can cut up to 31 cm deep x 2.2 m wide on a single pass or make multiple passes for greater widths.