Tarmac Grinding Ltd. would like to introduce our independent asphalt grinding company. We provide asphalt profiling or full depth reclaiming for governments, cities, municipalities, civil contractors and road builders. We have performed our services throughout BC and Alberta. Our machines can perform a wide variety of tasks when grinding asphalt, from profiling to reclaiming to sweeping up.
Need a quote?
All estimates are free! Call Aaron @ 604-226-6824

Services
Trench Grinds prior to pipe installation. Ideal for water mains, sewers; gas mains, etc...
Profiling for butt-joints in existing asphalt.
Asphalt Patching.
Total and Partial reclamation and removal.
Power Sweeping and cleaning up.
Grade Preparation.























Advantages
One step process instead of cutting, excavating, hauling, and dumping.
This program recycles asphalt that would normally be dumped into expensive landfills.
Recycled asphalt is re-usable as approved back fill.
Trucking of broken asphalt is eliminated. The asphalt can be stock piled on site for back fill later.
No pipe laying delays. After we grind the trench, the grindings can be left in the trench as a temporary road patch and traffic can immediately drive over the trench.
Our grinders are equipped with side bits that produce a feathered rough edge along the trench sides rather than a straight cold cut (from saw cutting). This allows for a superior base and final install of hot mix asphalt when the job is completed.
Comparable or less costly than saw cutting... or much less costly after you factor in stripping, hauling, and dumping of asphalt chunks.
Reduce your restoration costs and excavation costs with a narrow trench.
Our profiling machines also allow us to prepare existing asphalt for overlays and patching.
Companies who have utilized our services:
AC Paving
B & B Contracting
B.C. Ministry of Transp.
Baxter Curbing & Concrete
Beaverdale Const. Ltd.
Bel Contracting
Bird Construction Company
Bray Enterprises Ltd.
Capilano Hwys
Central Valley Excavating
Chet
City of Abbotsford
City of Richmond
Coastal Mountain Excavating
Columbia Bitulithic
Con-West Contracting Ltd.
Corporation of Delta
City of Langley
DSM Excavating
FTG
Gemco Construction Ltd.
Grandview Blacktop
Hexcell Construction Ltd.
Imperial Paving
J. Cote & Son Excavating Ltd.
Jack Cewe Ltd.
Jake’s Contracting
Jeff J. Verhiel Contractors
John Floris
Lafarge Construction
Marten’s Asphalt
Matcon Civil Constructors Ltd.
Municipality of Langley
Palmierri Bros
PCL
Pioneer Paving
Ponte Bros
Progressive Contracting
S&S Asphalt
Sandpiper Contracting Ltd.
Save On Asphalt
South West Contracting
Tag Construction
Tyam Construction Ltd.
Western Star Contracting
Westpro Constructors Gp Ltd.
White Rock Utilities Ltd.
Win Van Paving
Our Fleet
High-Flow Skid Steer Loaders
450mm profiler head: can grind to a depth of 100mm, ideal for small butt joints against manholes & around valves.
50mm profiler head: ideal for keying in concrete curbs in parking lots.
1.5 and 1.82 meter wide sweeper attachments; usually works behind profiler cleaning up ground asphalt finds. Swept material can be dumped right into dump trucks from sweeper bucket or stockpiled on site.
1.82 meter wide cleanup bucket for grading & loading.
Our loaders are equiped with a water system to eliminate dust and smoke caused by grinding.
Reclaimers
This 28,000 kg self-propelled machine is best suited for full-depth asphalt reclamation and for mixing loose material.
The RS-650 offers the power and performance to make high production work of even the most difficult cutting and mixing assignments.
The machine's standard 2.4 m wide drum is fitted with conical teeth for reclamation and stabilization and offers variable cutting depths up to 16 inches.
Wirtgen 120cfi Profilers
This 20,000 kg self-propelled machine can perform full depth removal or profiling.
Prepares existing asphalt for overlays with programmable grade controls for both sides of drum during cut.
Ideal for butt joints/step mill before overlay; curb reveals before overlay; MMS for permanent patch on trench lines.
Can cut up to 33 cm deep x 1.2 m wide on a single pass or make multiple passes for greater widths.
Wirtgen 210i Profilers
This 36,040 kg self-propelled machine can perform full depth removal or profiling.
With its innovative extraction technology, the vacuum cutting system ensures perfect visibility of the milling edge during the day and at night.
Prepares existing asphalt for overlays with programmable grade controls for both sides of drum during cut.
Ideal for butt joints/step mill before overlay; curb reveals before overlay; MMS for permanent patch on trench lines.
Can cut up to 31 cm deep x 2.2 m wide on a single pass or make multiple passes for greater widths.